Deciding how to choose a plastic seal shouldn't involve guesswork. Plastic security seals are the most widely used seal type in Australian logistics - 3PLs, retail distribution centres, airline ground handlers and freight forwarders get through them in the tens of thousands each month - and the per-unit price is low enough that most buyers specify by habit rather than by spec. That works until the day a dispute lands at the receiving end and the seal that was meant to do a job wasn't built for it.
This guide walks through the five decisions that actually matter when you're specifying plastic seals for your operation: strap thickness and strength, length, locking head, custom branding, and the application-vs-cost trade-off. By the end you'll know which of our range fits each lane and each pack-out point in your operation.
First, What a Plastic Seal Actually Does
A plastic seal is an indicative security seal - meaning it shows whether a container, cage, tote or bag has been opened, rather than physically preventing someone from opening it. The strap threads through the sealing point, pulls tight, locks into the head, and can only be removed by cutting. Every seal carries a unique sequential number, so the one on the cage at pack-out should match the one scanned at receiving.
Plastic seals sit in the Indicative seal category of the ISO 17712 taxonomy. They are not the right choice for international container exports (which need ISO 17712 High Security classification bolt seals), but they are exactly right for the domestic freight, roll cages, totes, airline ULDs and last-mile movements that make up the bulk of Australian logistics every day. If you want the full context on when each seal type applies, our pillar guide -
What Is a Security Seal? The Complete Australian Guide - covers it in depth, and the Bolt vs Cable vs Plastic vs Padlock comparison is the direct resource for choosing between seal types.
Decision 1 - Strap Thickness and Strength
The strap is the part that threads through the sealing point and takes the load if someone tries to force the seal. In the Seals HQ range, plastic seals are grouped into three duty classes:
-
Heavy Duty (320mm strap) - the strongest plastic seal class, built for container doors, large roll cages, and freight where the strap needs to resist pull force in service. Available as the Heavy Duty 320 ($45.00/pack) and Heavy Duty 320 Custom Design ($45.00/pack with branding).
-
Medium Duty (250-340mm strap options) - the all-rounder. Suits roll cages, tote boxes, airline ULDs, meter boxes and most pack-out applications. Three options cover different length requirements: Medium Duty 150 ($27.50), Medium Duty 250 ($33.00), and Medium Duty 340 ($44.00).
-
Light Duty (215mm strap) - the high-volume consumables option. Right for tote boxes, store-return cages, internal document bags and secondary-containment applications where the sealing point is small and the duty cycle is high. Available as the Light Duty 215 Custom Design ($27.50) and Light Duty 215T ($27.50).
|
Quick rule of thumb Heavy Duty = container doors, large roll cages, high-value freight, outdoor or long-haul applications. Medium Duty = roll cages, airline ULDs, totes, meter boxes - the daily workhorse. Light Duty = totes, bags, document pouches, high-volume low-risk pack-outs. |
Decision 2 - Strap Length
Length is a physical fit question before it's a security question. If the strap is too short, it won't reach around the sealing point and lock into the head. If it's too long, the excess strap flaps around the container and the yard team ends up cutting more material than they need to.
Match the strap length to the sealing point:
|
Strap length |
Our product |
Typical sealing point |
|---|---|---|
|
150mm |
Medium Duty 150 |
Tote boxes, small meter housings, document pouches, bag closures |
|
215mm |
Light Duty 215 / 215T |
Tote boxes, store-return cages, airline tote closures, standard pack-outs |
|
250mm |
Medium Duty 250 |
Roll cages, ULDs, mid-size pack-out applications |
|
320mm |
Heavy Duty 320 |
Large roll cages, container doors, high-value freight |
|
340mm |
Medium Duty 340 |
Large roll cages and ULDs where 250mm is tight but Heavy Duty is overkill |
When in doubt, size up rather than down. A 20mm length margin at pack-out is far cheaper than a seal that wouldn't close on half the cages in a shift.
Decision 3 - Locking Head Type
The locking head is the business end of the seal - it accepts the strap, grips it internally, and can only be defeated by cutting through the strap or the head itself. Across the Seals HQ plastic seal range, locking heads come in two broad shapes you should be aware of:
Flat head
The compact, low-profile option. Flat heads sit close to the sealing point and are the right choice where the seal has to pass through a confined space - a tight hasp, a narrow pull-loop, or a stacked cage where a bulky head would catch on the next unit.
Barrel head
The more common shape across indicative seal ranges. The barrel head carries a larger numbering surface, which means better visibility for yard teams scanning seal numbers at reconciliation and more space for custom branding. The Light Duty 215T model is the Seals HQ barrel-head option in the light-duty class.
In practice, most Australian 3PLs and retailers standardise on whichever shape their existing scanning and reconciliation workflow was set up for. If your receiving team scans seal numbers from across a cage aisle, barrel heads are easier to read. If your yard crew hand-handles every seal at close range, flat heads are faster to apply and harder to snag.
Decision 4 - Custom Branding, Numbering and Colour
Every plastic seal carries a unique sequential number from the factory. What you choose to add on top of that is the operational difference between a seal that's part of your chain-of-custody workflow and a seal that's just a cable tie with a number on it.
Custom branding - your logo
Adding your logo to the strap or barrel does two things. First, it deters substitution - a seal with your branding on it can't be quietly swapped for a generic one without a receiver noticing. Second, it reinforces the audit trail when someone upstream disputes whether your freight was sealed at pack-out. Heavy Duty 320 Custom Design and Light Duty 215 Custom Design are the ranges in the Seals HQ catalogue built for this, with artwork approval taking 24-48 hours before the production run.
Sequential numbering, barcodes and QR codes
Sequential numbering is standard across the range. Where operations benefit from automated scanning at receiving - particularly across multiple stores or DCs - a barcode or QR code on the strap can be added to the standard numbering sequence. Minimum order quantities for custom printing typically start at 500 units; bulk pricing kicks in at 250 units for stock lines.
Colour coding
Colour-coded plastic seals are the fastest way to separate freight by route, shift, site or client across a busy DC yard. Yellow for the primary DC-to-store route, blue for store-returns, red for high-value or priority loads - the colour code lives above the number, giving the yard team a visual signal they can act on from across the yard before anyone pulls the manifest.
For operations needing colour-coded freight plus ISO 17712 High Security classification (international container exports for example), plastic seals aren't the right fit - that's where the Dual Colour Bolt Seal comes in. For everything else, colour-coded plastic pull-tights do the job at a fraction of the cost.
Decision 5 - Matching Duty to the Application (and Cost)
The last decision is where buyers most often over- or under-spec. Over-specifying - reaching for Heavy Duty on a tote box that will travel eight kilometres from DC to store - adds cost without buying any extra security. Under-specifying - using Light Duty on a container door - means the seal may not survive the duty cycle, and the chain-of-custody record falls over at the first exception.
Three practical patterns we see across Australian 3PLs and retailers:
-
Mix across the operation. Most 3PLs run two classes in parallel - Heavy Duty on outbound container and long-haul freight, Medium or Light Duty on store-return cages and inter-DC moves. A single class for everything is almost never the most cost-effective answer.
-
Match to the receiving-end discipline. If your receiving team visually checks every seal number at the dock, invest in larger numbering surfaces and colour coding. If reconciliation is automated via barcode scanning, strap size matters more than head visibility.
-
Run the real-world cost calc. Price breaks at 250, 1,000 and 5,000 units change the per-unit cost materially. A high-volume 3PL that hits the 5,000-unit tier makes the Heavy-Duty-vs-Medium-Duty cost gap close by roughly 15-20%.
Where Plastic Seals Fit in the Wider Seal Range
Plastic seals are one seal type in a wider family. If you're not sure whether a plastic seal is actually the right starting point, the Seal Selection Tool steps you through four questions and recommends the right product. For a side-by-side view of plastic against the alternatives, the Bolt vs Cable vs Plastic vs Padlock comparison lays out where each type earns its keep.
And for Australian buyers specifying plastic seals in high volume across multiple states, the Shipping, Lead Times & Delivery by State page sets out the dispatch cutoff (1:00 PM AEST, or 11:00 AM WA time for Perth customers) and metro-by-metro delivery windows so you can plan standing orders against your pack-out cycle.
Frequently Asked Questions
What is the difference between Heavy Duty, Medium Duty and Light Duty plastic seals?
Heavy Duty plastic seals (Heavy Duty 320) carry the strongest strap and are built for container doors, large roll cages and long-haul freight. Medium Duty (available at 150mm, 250mm and 340mm strap lengths) is the daily workhorse for roll cages, totes and airline ULDs. Light Duty (215mm) is the high-volume consumable option for tote boxes, store-return cages and secondary containment where the duty cycle is high.
How do I know what strap length to order?
Match the strap length to the sealing point. Tote boxes and small meter housings typically need 150-215mm straps; roll cages and airline ULDs need 250mm; large roll cages and container doors need 320mm. When in doubt, size up - a 20mm length margin at pack-out is far cheaper than a seal that won't close on half your cages.
Are plastic seals ISO 17712 compliant for international container exports?
No. Plastic pull-tight seals are Indicative class seals under the ISO 17712 taxonomy. International container exports require ISO 17712 High Security classification bolt seals, which are steel, not plastic. Plastic seals are the right choice for domestic freight, roll cages, totes, airline ULDs and last-mile delivery where indicative tamper evidence is sufficient.
Can plastic seals be custom-printed with our logo and numbering?
Yes. Logo, sequential numbering, barcodes, QR codes and colour coding are all available on plastic seals. Heavy Duty 320 Custom Design and Light Duty 215 Custom Design are the pre-set ranges for custom printing; minimum order typically starts at 500 units, with 24-48 hours to print after artwork approval, plus standard transit time.
What's the minimum order and bulk-pricing structure for plastic seals in Australia?
Stock lines are available in standard pack quantities with no minimum. Bulk pricing starts at 250 units, with further breaks at 1,000 and 5,000 units. Custom-printed runs typically start at 500 units. Standing weekly or fortnightly PO delivery is available on account for 3PLs and retailers running high-volume programmes.
How fast can I get plastic seals delivered in Sydney, Melbourne, Brisbane and Perth?
Stock orders placed before 1:00 PM AEST (11:00 AM WA time) dispatch the same business day. Sydney, Melbourne and Brisbane metro are 1-2 business days; Adelaide and Canberra 2-3 days; Perth metro 3-5 days. Custom-printed orders add 24-48 hours for print production, then standard transit time applies.
Should I use a flat head or barrel head locking seal?
Barrel heads carry a larger numbering surface and are easier to read at a distance - the right choice if your receiving team visually scans seal numbers at the dock. Flat heads are lower profile and better where the seal has to pass through a confined space or where yard teams hand-handle every seal at close range. Most operators standardise on whichever shape their existing scanning workflow was set up for.
Five Decisions, One Right Answer for Your Operation
Choose by duty (Heavy, Medium or Light), match by length, pick a locking head your team will actually use, decide on custom branding and colour coding, then match the whole spec to the real-world cost at your volume. Done right, plastic seals are the cheapest reliable chain-of-custody signal your operation runs - done wrong, they're an invisible operational tax that only surfaces when something goes missing at the receiving end.
|
Need help matching plastic seals to your operation? Browse the plastic seal range at sealshq.com.au/collections/plastic-seals, run the Seal Selection Tool to get a matched recommendation in four questions, or request a bulk quote with your seal type, strap length, quantity and dispatch suburb for a same-day response. |
